Stub Shafts

STUD, FOR LG. HERRINGBONE GEAR SHOULDER 2 5/16" x 1 15/16" x 11 1/2"
IR-118-618

STUD 1" X 3" OIL LINE CONNECTION AT END OF STUD
IR-CW-300022

SHAFT, 12" SHAFT
IR-CW-30008

STUD STEPDOWN SHAFT FROM 2 5/16" TO 2" 11.25" LONG
IR-STEPDOWN-11.25X2X2.312

STUD 9.5" X 2" HARDENED IDLER STUB SHAFT STEP DOWN 2" TO 1 15/16"
IR-STEPDOWN-128-626

STUD 10.5"X2" HARDENED SHAFT STEP DOWN 2" TO 1 15/16"
IR-STEPDOWN-128-627

11.5"X2" STUD FOR HERRINGBONE STEP DOWN 2" TO 1 15/16"
IR-STEPDOWN-128-628

IDLER GEAR SHORT
IR-STUD-01

STUD FOR IDLER GEAR LONG
IR-STUD-02

STUD MAIN DRIVE STUD 1 15/16" X 11 1/2"
IR-STUD-04

STUD DRIVE STUD (USE 1.93,12475-TG&P) 1 15/16" X 10 1/2"
IR-STUD-05

STUD IDLER DRIVE STUD 1 15/16" X 9 1/2"
IR-STUD-06

STUD FOR BELLCRANK LOCATED ON CENTER RH REAR
IR-31140-6079

STUD FOR CHAIN IDLER LVR
IR-110-635

SHORT STUD COUNTER WEIGHT STUD
IR-3118-635

12.5" LONG STUD SHAFT FOR LG. HERRINGBONE GEAR SHOULDER 7.75" LONG. 1.937 DIAMETER
IR-118-618L

IDLER STUB SHAFT FOR NEEDLE BEARINGS 2" x 9 1/2" HARDENED
IR-128-626

MAIN DRIVE SHAFT FOR 6 ROLL S.S. IRONER 12.5" X 2" NEEDLE BEARINGS
IR-126-66

MAIN DRIVE SHAFT FOR 6 ROLL S.S. IRONER 12.5" X 1 15/16" BRASS BUSHING
IR-126-66-A

DRIVE STUB SHAFT fOR NEEDLE BEARINGS 2" x 10 1/2" HARDENED
IR-128-627

15" X 2" SHAFT
IR-128-627LONG

STUD, LG. HERRINGBONE GEAR
IR-128-628

STUD, APRON IDLER
IR-3118-6118

STUD TAPE BAR BRACKET STUD FOR PAT #3118-1048
IR-31140-65A

STUD 1" X 2" OIL LINE CONNECTION AT END OF STUD
IR-CW-300023

STUD FOR 80T IDLER GEAR SHOULDER 2-5/16" X 1-5/16" X 9-1/2" LONG
IR-3118-6245

STUD FOR 80T WITH 12 TOOTH SPROCKET 2 5/16" X 1 15/16" X 10.5"
IR-3118-6246

STUD 1" DIAMETER 2" LONG OIL LINE CONNECTED TO THREADED SECTION
IR-CW-300019